1978 CJ-7 Wiper Motor - 4WD Forums at 4 Wheel Drive Magazine 4 Wheel Drive Magazine
Facebook Click here to find out more!

1978 CJ-7 Wiper Motor

  
User Name:
Password:
Join FREE Now!
Forgot Password?
Forgot User Name?
Remember Me
Home | Active Posts | Search | Register | Terms | FAQs
Rss
Item Posts    Sort Order

1978 CJ-7 Wiper Motor

 
thor006 thor006
New User | Posts: 1 | Joined: 09/10
Posted: 09/19/10
05:41 PM

Hi,
I have a 78 cj-7 that a new windshield wiper motor swings the blades to far and sometimes they jam, does anyone know if there's adjustment to shorten the swing?

                                  Thanx!
                                        Thor006  

 
4wdtech 4wdtech
Moderator | Posts: 161 | Joined: 06/06
Posted: 09/20/10
02:25 PM

I'm not certain if there is a way to adjust the wiper pivots and/or linkage. the parts may simply be worn out and in need of replacement. you can buy a wiper linkage kit for about $100 or less. kits typically include new pivots and linkage as well as pivot nuts, arm, spacers, clips, and gaskets. I'm pretty sure this will fix the problem. Omix Ada offers a well-packaged wiper linkage kit that is sold by many outlets, including JC Whitney, Morris 4x4 Center, and others. Crown Automotive also offers wiper linkage kits.

hope this helps. 'wheel on.  

 
notthatjeffy notthatjeffy
Moderator | Posts: 42 | Joined: 06/10
Posted: 09/27/10
12:29 PM

You can adjust them by pulling the arms off the spline shaft and relocating them on the splines.  This will increase the swing in the opposite direction and reduce it in the other.  If your wipers are going off the windshield then you'll want to bring them in a bit.  

 
4wdtech 4wdtech
Moderator | Posts: 161 | Joined: 06/06
Posted: 09/30/10
12:28 PM

I was thinking too technical. relocating on the spline shaft makes sense. good advice!